Address:
245 Albert Amon Street,
Meadowdale,
Germiston,
Republic of South Africa
Probe is South Africa’s largest importer of premium, maintenance-free, fit and forget batteries and a leader in rotating electrics, with over 50 years of experience in distributing and providing aftermarket support for many international brands.
Copyright 2023 by Probe Industrial | Terms Of Use | Privacy Statement | Powered by: WoW Interactive
Standard reference conditions ISO 7183:
– ambient temperature Min Max: 2/40°C
– liquid temperature Min Max : 5/50°C
– temperature nominal 20°C
– liquid: H2O
The CGW water/liquid chiller is designed especially for use in industrial applications.
The use of the chillers assure an accurate control of the temperature of the water or the liquid to be cooled.
All the production steps, from the development to the selection of the components, are oriented to offer an high quality and a customised solution in
accordance with the customer’s needs.
Available Bi- frequency models 400/460/3/50/60 Hz.
The chillers CSW series are used to power up to 3,9kW. CSW chillers are specifically built for indoor installation for cooling of plants whose the vector fluid is water or glycolate water. Suitable for industrial applications such as cooling of lubricating oil for machine tools, welding units, cutting machines and machines in general which require a constant cooling.
Max Pressure 16 bar
Data refer to the following nominal conditions:
Max. working condition:
The condensed water inside the compression chamber will certainly contain particles of the oil used as compressor lubricant/ refrigerant.
OWS Series
The condensed water inside the compression system will certainly contain particles of the oil used as compressor lubricant/ refrigerant.
To discharge the water into the drainage, according to the regulations required in the country of installation, the water have to be previously purified. Furthermore the condensate collection and disposal usually has a high cost and is difficult to manage. They normally require on-site stockpile and transportation to centres dealing with special waste treatment, together with relevant registration documents, if necessary.
ATS’s OWS Series separators are used to this end, because they are easy to install and manufactured with recyclable materials. These accessories guarantee excellent performances and maximum reliability, thanks to the higher quality and long lifespan of the new cartridge filters.
MAIN FEATURES
The compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments.
SGO Gold Separator.
The new solution in compressed air filtration.
The compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments. The removal of these contaminants is necessary to sustain the equipment life and keep the production operations efficient.
Rust, scale and decay within compressed air piping system reduce the equipment lifetime, as well as the ambient air containing gaseous and corrosive substances.
The compressed air purification equipment provides high quality air with the lowest cost of operation.
The compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments.
The new solution in compressed air filtration
The compressed air contains harmful solid, liquid and vaporous contaminants that can damage pneumatic equipment, control and instruments. The removal of these contaminants is necessary to sustain the equipment life and keep the production operations efficient.
Rust, impurity and oil residual within compressed air piping system reduce the equipment lifetime, as well as the ambient air contain gases and corrosive substances.
The compressed air purification equipment provides high quality air with the lowest cost of operation.
ATS filters
The series of FGO filters includes a wide range of flow rates, and 4 levels of filtration:
Automatic drain, gauges and all accessories are described an Accessories page.
Linea | Taglia | Tipo | Configurazione | Castomizzazione | |
---|---|---|---|---|---|
Prodotto | Prodotto | Prodotto | Standard | ||
** | FGO | 00034. | F. | PG. | 00. |
Sigle linea prodotto | Unità di misura | Sigle Prodotto | Conf cartuccia elemento | 00 standard ATS | |
FGO. Filtri |
m3/h. | F. FILTRO+ELEMENTO |
CONFIGURAZIONE CARTUCCIA | 00.RAL 5015+ Filetto BSP-F | |
FGO. Separatori |
—- | F. SEPARATORE+ELEMENTO |
0 NESSUNA CARTUCCIA | —- | |
—- | —- | E. SOLO ELEMENTO |
P. FILTRO CON CARTUCCIA PRE FILTRO |
—- | |
—- | —- | —- | M. FILTRO CON CARTUCCIA PRIMO DISOLIATORE |
—- | |
—- | —- | B. SOLO CORPO |
H. FILTRO CON CARTUCCIA SECONDO DISOLIATORE |
—- | |
—- | —- | —- | C. FILTRO CON CARTUCCIA CARBONI ATTIVI |
—- | |
—- | —- | —- | S. CARTUCCIA SEPARATORE |
—- | |
—- | —- | —- | CONFIGURAZIONE OPZIONI | —- | |
—- | —- | —- | G. MANOMETRO DIFFERENZIALE |
—- | |
—- | —- | —- | M. SCARICO MANUALE |
—- | |
—- | —- | —- | A. SCARICO AUTOMATICO |
—- | |
—- | —- | —- | X. MANOMETRO DIFFERENZIALE E SCARICO AUTOMATICO |
—- | |
—- | —- | —- | Y. MANOMETRO DIFFERENZIALE E SCARICO MANUALE |
—- |
The cold regenerated adsorption dryers of the series HGO dry the compressed air with efficiency and reliability until a pressure dew point of -40 °C ,and the version with HGL dew point of -70°C. They are compact units, ready for the connection, for wall or floor installation with built-in upstream and downstream filters and designed for volumetric flow rates up to 1500 m³/h.
The cold regenerated adsorption dryers of the series HGL dry the compressed air with efficiency and reliability until a pressure dew point of -70 °C. They are compact units, ready for the connection, for wall or floor installation with built-in upstream and downstream filters and designed for volumetric flow rates up to 480 m³/h.
The inlet compressed air comes into the double chamber system of one tank through the filter of the series FGO: both tanks are filled with a desiccant agent (Activated alumina) of high quality; whilst the compressed air passes through one chamber becoming dry, the regeneration process unfolds in the second chamber. At the beginning, the chamber is opened against the current and part of the dry air passes through the desiccant agent and extracts the damp deposit. At the end of the damp extraction, the operation pressure is recreated into the second chamber so as to start the drying process again in the same chamber. It allows a constant working with the exchange procedure between the chambers, which are equipped with single command pneumatic valves.
The dry compressed air passes through the outlet filter of the series FGO and the network connected downstream. The adsorption dryers of the series HGO work with a regular exchange interval between the chambers. In case of compressed air network with unsteady operating pressure and quantities, the version equipped with dew point meter is available. In this case, if required, a switch of chamber unfolds.
Only when the dew point has been reached, the transition to the other chamber takes place. This
procedure allows the drying process extension, avoiding the airflow regeneration. The compressed air can be dried optionally, depending on a pressure dew point between -20° and -70°C.
The cold regenerated adsorption dryers of the series HGO dry the compressed air with efficiency and reliability until a pressure dew point of -40 °C ,and the version with HGL dew point
of -70°C. They are compact units, ready for the connection, for wall or floor installation with built-in upstream and downstream filters and designed for volumetric flow rates up to 640 m³/h.
The cold regenerated adsorption dryers of the series HGO dry the compressed air with efficiency and reliability until a pressure dew point of -70 °C. They are compact units, ready for the connection, for wall or floor installation with built-in upstream and downstream filters and designed for volumetric flow rates up to 320 m³/h.
The inlet compressed air comes into the double chamber system of one tank through the filter of the series FGO: both tanks are filled with a desiccant agent (Activated alumina) of high quality; whilst the compressed air passes through one chamber becoming dry, the regeneration process unfolds in the second chamber. At the beginning, the chamber is opened against the current and part of the dry air passes through the desiccant agent and extracts the damp deposit. At the end of the damp extraction, the operation pressure is recreated into the second chamber so as to start the drying process again in the same chamber. It allows a constant working with the exchange procedure between the chambers, which are equipped with single command pneumatic valves.
The dry compressed air passes through the outlet filter of the series FGO and the network connected downstream. The adsorption dryers of the series HGO work with a regular exchange interval between the chambers. In case of compressed air network with unsteady operating pressure and quantities, the version equipped with dew point meter is available. In this case, if required, a switch of chamber unfolds.
Only when the dew point has been reached, the transition to the other chamber takes place.
This procedure allows the drying process extension, avoiding the airflow regeneration. The compressed air can be dried optionally, depending on a pressure dew point between -20° and -70°C.
The DTG series incorporates in a single machine the after-cooler, the dryer and, optionally, the pre-filter; it is the evolution of GOLD series, but updated to new technologies in order to work in high temperature.
The DTG series incorporates in a single machine the after-cooler, the dryer and, optionally, the pre-filter; it is the evolution of GOLD series, but updated to new technologies in order to work in high temperature.
This dryer combines a heat exchanger all-aluminum, unique in its category, the successfull all-aluminum heat exchanger, assembled on all of our machines, feature the patented design and exclusive property of ATS, and a possible pre-filter complete with automatic condensate drain.
The product has many features:
*Only for DTG270 Tamb, max=45°C Tin, max=90°
The exclusive line of ATS refrigerator dryers offers the highest performance in a technology concentrate. Dryers are built with quality components to ensure superior performance and reliability.
Standard reference conditions ISO 7183:
– ambient temperature: 25°C
– inlet air pressure: 7 bar
– relative humidity: 35%
– dew point: Class 4 (ISO 8573-1)
– inlet water temperature: 29.4°C
– water pressure: Min. 2 bar
Max working condition:
– ambient temperature: 50°C
– inlet air temperature: 70°C
– inlet water temperature: 35°C
– water pressure: 10 bar
ATS has designed and manufactured a new range of refrigerated compressed air dryers that provides a combination of technology and simplicity.
Thanks to SILVER series, ATS has developed a compact product to meet the needs of its most demanding customers, and get a good value for money on market.
All models are equipped with the same technology system of the Gold series to ensure a dew point of 5 ° C without sacrificing reliability and safety; the aluminium heat exchanger has been studied and patented in order to offer the maximum performance and minimum pressure drop.
The application scope of the SILVER series ranges is from small business to medium industry. It is suitable even for all those accurate customers searching for the best value for money. ATS designed and developed the SILVER series in total respect for the environment through the use of eco-friendly gases and recyclable materials.